Arnott Aftermarket New and Remanufactured O.E. Rear Shocks for E-Class & CLS-Class Now Available
• Arnott has released two Arnott-engineered new rear shocks for 03-09 Mercedes-Benz E-Class and 05-11 CLS-Class applications with AIRMATIC & ADS, incl. AMG and for models without ADS or AIRMATIC, and with or without Rear Load Leveling excl. AMG
• Arnott also has released a remanufactured OE rear shock for 2003-2009 Mercedes-Benz E-Class and 2005-2011 CLS-Class AMG applications with ADS and AIRMATIC and without 4MATIC which support the OE semi-active damping functionality.
Arnott introduced additional Arnott designed aftermarket and remanufactured OE rear shocks for Mercedes-Benz E-Class and CLS-Class models. The new Arnott shocks bypass the aging and often-problematic Adaptive Damping System (ADS) on these older vehicles and include a coil resister which plugs in to the vehicle’s electrical system to eliminate any suspension dashboard warning lights.
The new Arnott shocks, which fit both the left and right side of the applications, include a custom-valved and thoroughly road-tested damper which provides an excellent ride which Mercedes owners expect. These shocks, which have zero miles on them, include a new polyurethane bump stop, new top and bottom mounts, which provide a tight fit, and a protective dust boot.
The Arnott-designed aftermarket rear shock SK-3012 fits the third generation E-Class (W211 chassis) and first generation CLS-Class (W219 chassis), both with AIRMATIC and with ADS including AMG models. Arnott’s SK-3039 is an Arnott-designed new rear shock for the 2003-2009 Mercedes-Benz E-Class (W211 chassis) and 2005-2011 CLS-Class (W219 chassis) without ADS or AIRMATIC and with or without Rear Load Leveling, excluding AMG models.
Arnott’s SK-3199 is a remanufactured OE rear shock for the 2003-2009 Mercedes-Benz E-Class (W211 chassis) and 2005-2011 CLS-Class (W219 chassis) AMG models with AIRMATIC and ADS, and without 4MATIC and Arnott remanufactured rear OE shocks are inspected, steam cleaned, and spin blasted to bare metal before being recharged with new high-performance shock oil. Worn components, such as the piston, rod guides and seal pack are replaced before being repainted with corrosion inhibiting paint.
The U.S. designed and assembled replacement shocks come just months after the company released Arnott remanufactured OE rear shocks SK-3197 and SK-3268 for the 2003-2009 Mercedes-Benz E-Class (W211 chassis) and 2005-2011 CLS-Class (W219 chassis) with ADS. Arnott’s new and remanufactured rear shocks are fully compatible with both the OE rear air spring and Arnott’s innovative rear air spring for the E-Class which offers a significantly faster and easier installation than the OE. Arnott also recently released SK-3262 – an Arnott remanufactured OE rear shock absorber for the left or right side of the 2006-2013 Mercedes R-Class (W251 Chassis) with ADS and AIRMATIC fitting both vehicles with 4MATIC or rear wheel drive, excluding AMG models.