Arnott's aftermarket air spring A-3328 fits the rear left side of 2014-2019 Porsche Macon (95B Chassis) with auto leveling. The Arnott air spring is assembled in the USA with a multi-ply ContiTech air sleeve, heavy duty crimping rings, anodized stamped steel top, anodized piston, protective dust cover and a new 6MM airline fitting for a fast installation.

NOTE: Arnott recommends replacing air springs in pairs.

Arnott's new aftermarket air springs for the Lincoln Continental are assembled with only the highest-quality material. Now you can keep that soft ride without spending a fortune! Arnott recommends changing the dryer when replacing air springs. Moisture in the system damages compressors.

NOTE: This part is for the left rear side.

Arnott's new air spring A-3332 for the left rear of the 2010-2019 Lexus GX 460 and 2009-2019 Toyota Land Cruiser Prado (J150) features a Continental ContiTech air bladder, heavy-duty crimping rings and high-impact plastic resin top mount and bottom piston. The Arnott air spring is assembled and tested in the USA. This air spring will replace the OE spring on vehicles with and without Kinetic Dynamic Suspension.

Arnott's new air spring for the rear left side of the 2009-2017 Mercedes-Benz E-Class (W212 Chassis) and 2012-2017 Mercedes-Benz CLS-Class (W218 Chassis), Part A-2791, features a new multi-ply Continental ContiTech air spring bladder, German-made crimping rings, custom-designed high impact resin top mount and bottom piston and 4 mm air fitting. The air spring, which is designed in the USA and assembled in the EU, comes with an air spring dust boot to protect it from debris.

Arnott's new product line for the rear of the BMW X5 includes a new rear comfort air spring featuring a Continental ContiTech bladder assembled with the highest-quality materials.

The kit comes complete with rear air spring and seal. Arnott recommends replacing Air Springs in pairs.

The Right Rear Air Spring is part number A-2501.

Arnott's new air spring A-3330 for the left rear of the 2013-2018 Mercedes C-Class (W205 Chassis) both with and without 4MATIC, incl AMG (excl C350e), features a new multi-ply ContiTech air sleeve, German-made crimping rings, CNC machined anodized aluminum top mount and bottom piston, as well as a 4 mm air fitting. The air spring, which is designed, assembled and tested in the USA, comes with an air spring dust cover to protect it from debris.

NOTE: Arnott recommends replacing both rear air springs at the same time.

Arnott's new product line for the rear of the BMW X5 includes a new rear air spring featuring a Continental ContiTech bladder assembled with the highest-quality materials .

Kit comes complete with rear air spring and seal.

Arnott recommends replacing Air Springs in pairs. Please also purchase Part Number A-2503 for the New Rear Right Air Spring.

Vehicles equipped with the Sport Suspension from the factory have firmer, shorter springs resulting in a lowered vehicle stance, along with shock absorbers that have been valved to yield firmer dampening. If you are unsure if your BMW has Sport Suspension, contact your dealer with the VIN to verify.

Arnott's aftermarket air spring A-3294 fits the rear left side of the C7 Chassis 2010-2018 Audi A6/A6 Quattro, 2012-2019 S6 & S7 and 2014-2018 RS7 models with air suspension. The Arnott air spring is assembled in the USA with a multi-ply ContiTech air sleeve, CNC machined aluminum top and piston, heavy-duty crimping rings, anodized stamped steel top, anodized piston, protective dust cover and a new airline fitting for a fast installation.

NOTE: Arnott recommends replacing these springs in pairs.

A-2737 Arnott's new air spring for the rear left of the 1997-2004 BMW 5 Series Estate Wagon (E39) with rear air leveling features a multi-ply Continental ContiTech air spring bladder, heavy-duty crimping rings, steel top mount and custom-designed high-impact resin 5 Series bottom piston with a brass insert for added durability. The BMW 5-Series air spring is designed in the USA and assembled in the EU.

Arnott part AS-2822 is a new, not remanufactured, aftermarket rear strut assembly for the 2007-2013 Mercedes Benz^® S-Class (W221) and CL-Class (W216) Sedan with AIRMATIC and with & without 4MATIC. This replacement strut, designed and assembled in the USA, features a new custom-valved shock absorber assembled with a durable new Continental ContiTech rubber air spring bladder and no lower isolator seal which is subject to failure on the O.E. The strut is partly protected by an aluminum can and dust baffle to keep out debris and is assembled with heavy-duty crimping rings, seals, O-Rings and bumpstop. This fully assembled air strut plugs directly into the vehicle's electronic connector and eliminates fault codes.

AS-3074 is an Arnott engineered new air suspension strut for the rear left side of the 2001-2006 Lexus LS 430 (UCF30 Chassis) with the height adjustable suspension option including the LS Ultimate Luxury edition. This new assembly replaces the OE strut and features a new, not remanufactured, custom- tuned shock absorber valved to provide the luxury ride LS owners expect. The Arnott strut features a new heavy-duty air bladder from ContiTech which is protected by an aluminum can along with a CNC-machined top mount made from aircraft-quality aluminum and special rubber coated steel vibration isolator plates. This new air strut is assembled in the USA with Arnott's long-lasting seals, O-rings, bump stop, heavy-duty crimping rings, OE style quick connect air fitting and a dust boot to protect the shock.

Arnott is pleased to offer this new, not rebuilt, Rear Left air strut for the 2002-2008 BMW 7-Series (E65 & E66 chassis) WITHOUT Electronic Damping Control (EDC). Arnott's aftermarket replacement strut features a heavy duty Continental ContiTech air spring bladder and a shock custom-designed for the 7-Series with a larger piston to provide excellent ride quality and stability. Arnott assembles these new struts in the USA using the highest quality materials including a CNC machined top mount and bottom air spring perch made of aircraft quality aluminum, new crimping rings, O-rings, bump stop, an aluminum can, air fitting and protective dust boot. This all new comes pre-assembled for an OE fit.

AS-3031 is an Arnott engineered aftermarket air suspension strut for the rear left hand side of the 2002-2010 Audi A8 (D3 Chassis) without sport suspension. This new, not remanufactured, assembly replaces the OE strut and features a premium Eibach damper, custom-tuned to provide a comfortable, yet responsive ride. The Arnott strut is built with Tier 1 components including O-rings, bump stop, heavy-duty crimping rings, new air line fitting, connector valve, and a multi-ply, cross-hatch air sleeve. The sleeve is protected by an aluminum can and dust cover and is coupled with a CNC-machined top mount made from aircraft-quality aluminum. This new replacement Audi A8 rear air strut is designed and assembled in the USA.

Arnott is pleased to offer this new, not rebuilt, Rear Right air strut for the 2002-2008 BMW 7-Series (E65 & E66 chassis) with Electronic Damping Control (EDC). Arnott's aftermarket replacement strut features a heavy duty Continental ContiTech air spring bladder and a shock custom-designed for the 7-Series with a larger piston to provide excellent ride quality and stability. Arnott assembles these new struts in the USA using the highest quality materials including a CNC machined top mount and bottom air spring perch made of aircraft quality aluminum, new crimping rings, O-rings, bump stop, an aluminum can, air fitting and protective dust boot. This all new strut turns off any dashboard suspension warning lights and comes pre-assembled for an OE fit.

Arnott's completely rebuilt OE Left Rear ABC (Active Body Control) strut for Mercedes-Benz AMG vehicles is painstakingly disassembled and rebuilt from the ground up and includes Arnott's exclusive, nearly indestructible, polyurethane seal which should provide many years of useful life.

AS-2959 (Left) is an Arnott Remanufactured Air Suspension Strut for the rear of the 2002-2009 Audi A8 (D3 Chassis) with Normal Suspension. The strut features an Arnott-engineered air spring bladder designed to eliminate the O.E. Reservoir. Remanufactured in the USA, each strut is thoroughly tested, cleaned, repainted and then rebuilt with heavy duty crimping rings, long lasting O-Rings, new connector valve, bump stop and dust cover.

This air strut assembly is only for vehicles with Normal Suspension.

Arnott's completely rebuilt OE left rear air strut for Mercedes-Benz vehicles is painstakingly disassembled and rebuilt from the ground up.

Arnott has worked directly with one of the largest seal manufacturers to design and test a nearly indestructible polyurethane seal you can expect to last for many years

NOTE: This part is for SL55 or SL65 AMG models ONLY!

Arnott's completely rebuilt OE Left Rear ABC (Active Body Control) strut for Mercedes-Benz vehicles is painstakingly disassembled and rebuilt from the ground up.

Arnott has worked directly with one of the largest seal manufacturers to design a nearly indestructible polyurethane seal you can expect to last for many years.

Arnott's completely rebuilt OE rear air struts for Mercedes-Benz vehicles are painstakingly disassembled and rebuilt from the ground up. Arnott has worked directly with one of the largest seal manufacturers to design and test a nearly indestructible polyurethane seal you can expect to last for many years.

NOTE: This part is for non-AMG models ONLY!

Arnott now offers a completely remanufactured OE rear left air strut for the 2003-2019 Bentley Continental GT and the 2006-2019 Bentley Flying Spur. Arnott thoroughly tests, cleans and repaints the OE Shock and then rebuilds it in the USA with a new heavy-duty air spring bladder manufactured by Continental ContiTech along with a new air valve, terminal/connector, bump stop, O-rings and gasket. Arnott's innovative design allows for a larger air volume so the OE reservoir is not used.

Arnott's remanufactured aftermarket ABC struts are now available! Please CLICK HERE TO CONTACT ARNOTT WITH YOUR REQUEST for more information.

Please CLICK HERE TO CONTACT ARNOTT WITH YOUR VIN NUMBER before ordering.

Arnott's completely rebuilt OE Left Rear ABC (Active Body Control) strut for Mercedes-Benz S-Class AMG vehicles, including the S63 and S65, is painstakingly disassembled and rebuilt from the ground up.

Arnott has worked directly with one of the largest seal manufacturers to design a nearly indestructible polyurethane seal which should last for many years.

Arnott part AS-2824 is a completely remanufactured OE air strut for the rear left side of the 2009-2015 BMW 7 Series (F01, F02, F04 Chassis) with EDC (Electronic Damper Control), VDC (Variable Damper Control) and the FlexRay communications protocol. Each OE BMW strut is painstakingly tested for FlexRay functionality and then disassembled before reused components are steam cleaned and spin blasted to bare metal. The shock portion of the strut is recharged with new high performance shock oil and worn internal shock components such as the piston, rod guides and seal pack are replaced. The damper and damping coil are dyno and functionally tested to assure OE performance and OE parts are repainted with corrosion inhibiting paint. The strut is then rebuilt with a new multi-ply rubber air sleeve manufactured by Continental ContiTech along with new heavy duty crimping rings, O-Rings, bump stop, bottom seal, sensor plug and air line fitting. All Arnott remanufactured struts are designed to work with the vehicle’s active damping and auto leveling functionality.

Arnott's completely rebuilt OE rear air strut for Mercedes-Benz vehicles feature a new air sleeve manufactured by Continental ContiTech.

NOTE: This part is not for vehicles with ABC Suspension.

Arnott's completely rebuilt OE left rear air strut for Mercedes-Benz vehicles is painstakingly disassembled and rebuilt from the ground up.

Arnott has worked directly with one of the largest seal manufacturers to design and test a nearly indestructible polyurethane seal you can expect to last for many years.

NOTE: This part is NOT for SL55 or SL65 AMG models!

Arnott's completely rebuilt OE Left Rear ABC (Active Body Control) strut for Mercedes-Benz AMG vehicles is painstakingly disassembled and rebuilt from the ground up.

Arnott has worked directly with one of the largest seal manufacturers to design a nearly indestructible polyurethane seal you can expect to last for many years.

NOTE: This part is for SL55 or SL65 AMG models ONLY!

AS-2966 is an Arnott Remanufactured Air Suspension Strut for the Rear Left side of the 2002-2010 Audi A8 (D3 Chassis) with Sport Suspension. This strut features an Arnott engineered air spring bladder custom designed to eliminate the O.E. Reservoir. Remanufactured in the USA, each strut is thoroughly tested, cleaned, repainted and then rebuilt with heavy duty crimping rings, long lasting O-Rings, new connector valve, bump stop and dust cover. This air strut assembly is only for vehicles with Sport Suspension.